Energy Optimiser

Energy Optimiser™
Heat Exchange Unit

The Energy Optimiser is a heat exchanger designed to achieve highly heat recovery efficiency and handle highly contaminated water. The Energy Optimiser uses a series of rotating disks to maximize the heat exchanging surface and prevent build up of deposits from the dirty effluent. The fresh and dirty water is completely separated by stainless steel surfaces.
  1. Home
  2. Our Offerings
  3. Energy Optimiser

Contact Us

Give us a call

Please contact us via calling +27(0)11-578-5000 or by sending an email and an Ecolab representative will get back to you.

Send mail to P.O. Box 8074, Edenglen, 1613.

For a Customer Services related query, please contact our Customer Services department directly on +27(0)11-578-5100 or email customerservicesa@ecolab.com.

In case of a chemical emergency contact: 0800-1-72743

Ecolab Sub-Saharan Africa Headquarters
Textile Care Division

1 Ampère Road, Chloorkop
Edenglen, Johannsburg, South Africa 1624

 

Tell Us About Yourself
Where Are you Located?
How Can We Reach You?
What Can We Help You With?

Equipment Details
Up to 50% energy savings on tunnel operations

  • Achieve up to 50% energy savings on tunnel operations, 20% on total plant energy
  • Self-cleaning, non-fouling design does not require pre-filtration
  • Low resistance to flow
  • Reduces effluent temperature to help meet wastewater regulatory requirements
  • Simple, process-integrated installation
  • Small footprint, no plant infrastructure required
  • 316 stainless steel
  • Rotating disks
  • Fresh water inside disks
  • Waste water outside disks
  • Energy savings
While the Energy Optimiser has a lower heat transfer efficiency than common end-of-pipe heat exchanger systems (such as Plate & Frame or Shell & Tube), it can be located directly at the tunnel where the water is hottest. Thus, recovering 75% of the heat from hotter water at the tunnel saves more energy than recovering 95% of the heat from cooler water further down the pipe, where much of the heat recovery opportunity has already been lost.
Specification Value
Dimensions 1900-3700 long, 735-750 high, 725 mm wide
Flow Capacity Max 300 L for waste and/or clean water flow
Pressure Rating Max pressure of 5³Pa and Minimum of 30³ Pa in waste and/or clean water circuit
Utilities Required 380 Volt, 50 Hz, 0,75-1,5 Kw